Noisy pipes are a nuisance in one's home. It can keep you awake at night and can cause a huge dent on your water bill every month. Another bad thing about noisy pipes is that they are very hard to locate, especially on your own. You may have to require the services of plumbing repair Sydney to be able to locate these problem areas fast and to resolve the issue.
Common Causes of Noisy Pipes
If you are starting to hear suspicious sounds and noises on your walls, floors and ceiling, you might have to seek help to get your piping systems checked. Most of the time, these hidden areas in your home are usually neglected and may break down when you least expect it. The most common reason why pipes create unwanted noise are the following:
- Water Hammer
Water hammer is one of the most common causes of noisy pipes. Water hammer is defined as the rushing of water through the pipe. When this rush of water is too strong, it may create a sound on your pipes, especially if you shut off the faucet and the flow of water is halted abruptly.
The energy that is halted goes somewhere else, usually behind your faucets. These areas are considered as air chambers, thus it will create sound when energy or force is transferred to these areas.
To prevent or solve water hammering issues in your pipe systems, you should drain your whole piping system to allow air to be pushed on the risers of your plumbing system, preventing water hammering in your pipes.
- Loose Pipes
Ageing pipes tend to loosen due to continuous use. It is another cause of noisy pipes in your home. When flushed water moves in large volumes in your pipes, your pipes tend to move or sway creating rattling that may cause your pipes to loosen from their fixed layout position.
To be able to solve this issue, you might have to ask a licenced plumber to add a stabilization base on the bottom of your pipe layout. Pipes that are suspended from the floor joists are most susceptible to this type of plumbing issue.
They can be easily checked and fixed by just crawling under your homes to identify which areas move when water is moving along your pipelines.
- Worn Out Washer
Worn-out washers located in the valve areas or the faucets of your piping system can cause a whistling or squeaky sound in your pipes. Valves that are connected to certain appliances at home, like your washing machines, are most likely to create irritating sounds when water travels from your pipes to your washing machine.
Although considered as the most common cause of noisy and leaky pipes, work out washers are the easiest to address and solve. You just have to turn off the valve or the faucet and replace the worn-out washer. Cracks in the washer can also cause unwanted noise so if you see some, they are also considered to be due for replacement.
- Toilets
Noisy pipes can also come from your bathroom toilets. If you notice a rattling or banging sound right after you flush your toilets, you might want to seek help from the nearest Sydney plumbing services in your area.
Most of the time, the ballcock assembly is the culprit of this unwanted noise. The accessory controls the filling process in your toilet flush. If this area is worn out, it may cause unnecessary sound when the flush is used.
Some ballcock assemblies can be easily repaired while others require immediate replacement. A licenced plumber can easily identify which ballcock assembly is due to be replaced or if one is repairable. However, in most cases, this accessory is often replaced.
Any home or establishment can experience noisy water pipes. You may be able to fix some of these issues on your own. However, to ensure that your plumbing system is working in its best possible condition, seeking help from a professional plumber is the ideal choice.
